for sale: CNC kit and plans for 15' micro cruiser,BEDARD ROG

Moderator: Moderator

Post Reply
mberlinger69
New Contributor
Posts: 1
Joined: Mon Jan 28, 2019 1:08 pm
Contact:

for sale: CNC kit and plans for 15' micro cruiser,BEDARD ROG

Post by mberlinger69 »

I have a complete CNC wood kit for a "RIVER OF GRASS" 15 micro cruiser from BEDARD yacht designs.

I bought the kit in September, but unfortunately I have to move and can't take the kit with me.

The cost new is $2500; seriously, no reasonable offer refused. I really don't want to have to throw this in the dumpster :(

I have removed all the panels from the sheets they were cut out of. the main hull panels were temporarily stitched together, but not epoxied. I can ship the kit as a pallet of the parts, just as it was shipped to me. (cost to ship from Florida to California was $600 for reference)

the kit comes as 13 sheets of marine plywood and two sheets of MDF (for temporary internal bulkeads during building). I also have the detailed plans.

the boat is made with the stitch-and-glue method, where you use thin wire to temporarily wire the panels together, then glue the joints with epoxy, and then remove the wires. This makes a very strong and very light boat.

see here for more details about the design.

https://www.bedardyachtdesign.com/desig ... o-cruiser/

https://www.woodenboat.com/boat-plans-k ... -cruiser-1

Image

Image
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest