Page 1 of 2
xxxxxx
Posted: Sun Jun 17, 2012 5:07 am
by peabody
Xxxxxx. Xxxxxxxx. Xxxxxxxxx
Re: brockway scow.
Posted: Mon Jun 18, 2012 6:05 am
by maki
Beautiful boat.
I've got a real weakness for work skiffs.
Might add a second low power outboard for serious
reliablity when you get to out of the way places.
Re: brockway scow.
Posted: Mon Jun 18, 2012 2:32 pm
by HappyDog
Start with 6 or 8 sheets of good 1/2" exterior plywood, add 8-10 1x2x16. Combine with a couple boxes of 1.5 inch stainless screws from the hardware store, some construction adhesive, and sweat. Round off the sharp edges and slather with a gallon or two of oil-base paint. Decorate and trim as desired!
You never forget your first boat build!
Posted: Mon Jun 18, 2012 2:52 pm
by peabody
Xxxxxxx. Xxxxxxxx. Xxxxxxxcx
Re: brockway scow.
Posted: Tue Jun 19, 2012 8:45 am
by Peter E
Well study that boat carefully before you start. There is some rocker in it so it isn't exactly a square box. Study carefully how the frames are put in. Get some like boat that you can measure and put your thoughts on paper. Then go for it.. Brockway had seen other boats before he started so he knew what didn't work and what did. You don't want to waste materials and time.
xxxxx. xxxxxxxx
Posted: Tue Jun 19, 2012 9:05 am
by peabody
Xxxxxxxx. Xxxxxx. Xxxxxxxxx
xxxxxxxx
Posted: Tue Jun 19, 2012 9:10 am
by peabody
Xxxxxxxx. Xxxxxxx. Xxxxxxxxx
Re: brockway scow.
Posted: Wed Jun 20, 2012 9:43 pm
by peabody
Hummmmmm?
Re: xxxxxx
Posted: Thu Jun 21, 2012 8:59 pm
by maki
Whats with the xxxxx?
Re: xxxxxx
Posted: Fri Jun 22, 2012 8:00 pm
by peabody
maki wrote:Whats with the xxxxx?
Trying to edit on a itty bitty phone... the letters keep poping up on screen.
Then i caint see what im typing... messed everything up.
Sigh*..........