SCAMP Plans
Moderator: Moderator
- Editors
- Site Admin
- Posts: 655
- Joined: Wed Sep 22, 2010 2:10 pm
- Location: Port Townsend, WA
- Contact:
SCAMP Plans
SCAMP plans are now 8 full sheets of Arch D size 24" x 36". Cost is $149 plus shipping. —Eds
Below is the link to the store for online SCAMP plan orders.—Eds
http://smallcraftadvisor.com/store/prod ... =57&page=1
NOTE ON THE NOTE: Plans have now been revised with many more details added—including an 8th sheet with rigging details. We now consider the plans complete, although we expect there will some minor revisions/additions (which we will make available via website or through PDF notes) in the future. A detailed building manual is also complete and available.
Below is the link to the store for online SCAMP plan orders.—Eds
http://smallcraftadvisor.com/store/prod ... =57&page=1
NOTE ON THE NOTE: Plans have now been revised with many more details added—including an 8th sheet with rigging details. We now consider the plans complete, although we expect there will some minor revisions/additions (which we will make available via website or through PDF notes) in the future. A detailed building manual is also complete and available.
You do not have the required permissions to view the files attached to this post.
The smaller the boat the bigger the adventure.
-
- Recognized Old Salt
- Posts: 805
- Joined: Sat Nov 20, 2010 8:39 pm
Re: SCAMP Plans
This is a quick review of Scamp's plans. Mike really likes them, says they are clear and easy to follow. The parts have come together rapidly.
Jackie Monies (for Mike)
Jackie Monies (for Mike)
- Editors
- Site Admin
- Posts: 655
- Joined: Wed Sep 22, 2010 2:10 pm
- Location: Port Townsend, WA
- Contact:
Re: SCAMP Plans
Hi All,
We were ready to mail the early sets and follow with any updates or revisions, but it happens that several fairly important details were going to be added as revisions this weekend, so we held plan orders for printing Monday. This means everything should ship Tuesday morning. We apologize for the delay but figure it was smarter to start with this revised set. —Eds
We were ready to mail the early sets and follow with any updates or revisions, but it happens that several fairly important details were going to be added as revisions this weekend, so we held plan orders for printing Monday. This means everything should ship Tuesday morning. We apologize for the delay but figure it was smarter to start with this revised set. —Eds
The smaller the boat the bigger the adventure.
- Editors
- Site Admin
- Posts: 655
- Joined: Wed Sep 22, 2010 2:10 pm
- Location: Port Townsend, WA
- Contact:
Re: SCAMP Plans
Plans getting their official sail number stamp.—Eds
You do not have the required permissions to view the files attached to this post.
The smaller the boat the bigger the adventure.
-
- Regular Contributor
- Posts: 86
- Joined: Sun Nov 21, 2010 10:06 pm
Re: SCAMP Plans
Nice to see, there are a lot of guys out there raring to get started and I note that small boat websites in may different countries are sitting up and taking notice. Hopefully there will be lots of build blogs so we can follow their progress.Editors wrote:Plans getting their official sail number stamp.—Eds
John Welsford
- Editors
- Site Admin
- Posts: 655
- Joined: Wed Sep 22, 2010 2:10 pm
- Location: Port Townsend, WA
- Contact:
Re: SCAMP Plans
Thanks, John! This has been a lot of fun already, and following the builds (and adventures) will make it even better. And you get to have this kind of fun multiplied by how many designs?
The smaller the boat the bigger the adventure.
-
- Regular Contributor
- Posts: 25
- Joined: Tue Nov 30, 2010 8:22 am
Re: SCAMP Plans
Hello;
I've seen "SCAMP" referred to as "Small Craft Advisor MAGAZINE Project" and Small Craft Advisor MICROCRUISER Project". Which is it?
Steve
I've seen "SCAMP" referred to as "Small Craft Advisor MAGAZINE Project" and Small Craft Advisor MICROCRUISER Project". Which is it?
Steve
- Editors
- Site Admin
- Posts: 655
- Joined: Wed Sep 22, 2010 2:10 pm
- Location: Port Townsend, WA
- Contact:
Re: SCAMP Plans
Steve,
Small Craft Advisor Magazine Project.
—Eds
Small Craft Advisor Magazine Project.
—Eds
The smaller the boat the bigger the adventure.
- Editors
- Site Admin
- Posts: 655
- Joined: Wed Sep 22, 2010 2:10 pm
- Location: Port Townsend, WA
- Contact:
Update on Plans
Ahoy SCAMPers!
Just a quick update. We've recently added plan details on building the mast box, and we're working on skeg detailing, aluminum spar options and specs, centerboard block and tackle details, and additional rigging details.
There has been one other small revision, a very minor widening of the trunk that affects measurements on a few sheets. However all the builder really needs to know is that he should build the board first and size the trunk accordingly, or make sure the centerboard is built to fit trunk. There is too much variation in thickness, due to how each builder fairs, glasses and paints the centerboard and trunk to rely solely on the stated dimensions.
When we have these new details finished we'll send a final set of replacement plans pages to each of you who've purchased plans already.
Thanks for your support.
Best,
SCA Crew
Just a quick update. We've recently added plan details on building the mast box, and we're working on skeg detailing, aluminum spar options and specs, centerboard block and tackle details, and additional rigging details.
There has been one other small revision, a very minor widening of the trunk that affects measurements on a few sheets. However all the builder really needs to know is that he should build the board first and size the trunk accordingly, or make sure the centerboard is built to fit trunk. There is too much variation in thickness, due to how each builder fairs, glasses and paints the centerboard and trunk to rely solely on the stated dimensions.
When we have these new details finished we'll send a final set of replacement plans pages to each of you who've purchased plans already.
Thanks for your support.
Best,
SCA Crew
The smaller the boat the bigger the adventure.
-
- Regular Contributor
- Posts: 120
- Joined: Sun Oct 03, 2010 2:56 pm
- Location: Tasmania, Australia
Re: Update on Plans
Will there be details or sketches on how the water ballast works and is rigged ?Editors wrote:Ahoy SCAMPers!
Just a quick update. We've recently added plan details on building the mast box, and we're working on skeg detailing, aluminum spar options and specs, centerboard block and tackle details, and additional rigging details.
SCA Crew
Cheers
Tasman