I'm researching the viability of a trip from Chicago, IL to Mobile, AL on the inland river portion of the Great Loop in a SCAMP. I think most of the bridge clearances are over SCAMP's air draft (~16'). I'm using the following parameters...
Distance: 1300 nautical miles
Average river speed (tail current): 1.5 knots
Average boat speed: 2.5 knots
Sailing time per day: 10 hours
Time enroute: ~1 month
Does anyone see anything grossly wrong with my napkin math or other complications that would arise from such an endeavor? Just dreaming here!
SCAMP for Great Loop (Inland Portion)
Moderator: Moderator
-
codefoster
- Regular Contributor
- Posts: 23
- Joined: Tue Nov 10, 2020 7:18 pm
-
Rob Hazard
- Regular Contributor
- Posts: 158
- Joined: Fri May 03, 2013 1:01 pm
Re: SCAMP for Great Loop (Inland Portion)
Do you own a SCAMP already, or are you just considering one?
Unstepping the mast is not a problem, so I wouldn't worry about bridge clearances.
Unstepping the mast is not a problem, so I wouldn't worry about bridge clearances.
-
codefoster
- Regular Contributor
- Posts: 23
- Joined: Tue Nov 10, 2020 7:18 pm
Re: SCAMP for Great Loop (Inland Portion)
I do, so I'm ready to go in that department 
Yeah, the stepping is easy but would still be a pain if it had to happen frequently, but I think I would rarely have to. That would be so cool to sail through downtown Chicago with rush hour traffic going overhead.
Yeah, the stepping is easy but would still be a pain if it had to happen frequently, but I think I would rarely have to. That would be so cool to sail through downtown Chicago with rush hour traffic going overhead.