Hello, I’m new here I live in Berlin, Germany and I’m very excited about sailing.
Berlin has a lot of water around it and I really wanna go sailing in my own little boat. When I stumbled over Scamp, I immediately knew that’s the boat I wanna build. But since I’m living in an Apartment and workshop space is hard to find and expensive, I was wondering if a 20' container would be enough to build a scamp (20' x 8' x 8' 6"). Also, I would build from a kit. I’m looking forward for some constructive feedback/ideas
Building a Scamp in a 20' container
Moderator: Moderator
-
- New Contributor
- Posts: 2
- Joined: Sun Aug 15, 2021 2:28 am
- Timo
- Regular Contributor
- Posts: 62
- Joined: Thu Mar 03, 2016 11:04 am
- Location: Finland
- Contact:
Re: Building a Scamp in a 20' container
Berlin must be a nice area for sailing. Someone told they even have a Nordic Folkboat fleet there.
I have been building Scamp in a room of 4.5 × 5.0 × 2.5 meters (15' × 16' × 8'). Space there is constrained, especially when you are cutting or gluing something but it's manageable. In summer you can cut plywood outdoors too. You should have answers to the following questions:
1. Where to store your plywood, epoxy, tools and other stuff?
2. How to heat the container during the cooler period of the year?
3. Can you temporarily work outdoors to cut wood or plywood?
4. What about ventilation?
A second container would be useful, or perhaps building a loft inside the container. I hope you can get started despite of the challenges.
I have been building Scamp in a room of 4.5 × 5.0 × 2.5 meters (15' × 16' × 8'). Space there is constrained, especially when you are cutting or gluing something but it's manageable. In summer you can cut plywood outdoors too. You should have answers to the following questions:
1. Where to store your plywood, epoxy, tools and other stuff?
2. How to heat the container during the cooler period of the year?
3. Can you temporarily work outdoors to cut wood or plywood?
4. What about ventilation?
A second container would be useful, or perhaps building a loft inside the container. I hope you can get started despite of the challenges.
-
- New Contributor
- Posts: 2
- Joined: Sun Aug 15, 2021 2:28 am
Re: Building a Scamp in a 20' container
Thank you Timo for your kind answer.
These are great questions and very helpful.
The place I found offers containers that are stored in a big warehouse. The concept is that each container can be used as a small workshop. They offer general tools like table saw, standing drills etc for everyone to use. So cutting bigger pieces shouldn’t be a problem.
I think heating and especially ventilation will be the most important questions to answer!
These are great questions and very helpful.
The place I found offers containers that are stored in a big warehouse. The concept is that each container can be used as a small workshop. They offer general tools like table saw, standing drills etc for everyone to use. So cutting bigger pieces shouldn’t be a problem.
I think heating and especially ventilation will be the most important questions to answer!
- Heimfried
- New Contributor
- Posts: 2
- Joined: Wed May 05, 2021 12:04 pm
Re: Building a Scamp in a 20' container
Hi J Y,
wrote you a PM.
Günter
wrote you a PM.
Günter