SCAMP #457 build at Lake Chapala Mexico

The place to discuss SCAMP (Small Craft Advisor Magazine Project), our 11' 11" micro minicruiser.

Moderator: Moderator

steve71
Regular Contributor
Posts: 32
Joined: Sun Feb 11, 2018 8:43 pm

Re: SCAMP #457 build at Lake Chapala Mexico

Post by steve71 »

Hi Greg,
Thanks for that info on glassing the planks. I will be keeping your tips in mind.
Been away from the boat lately and hope to get back to it soon. Got to get more glass cloth ordered and maybe some more epoxy too.
Right now, due to mishaps people have reported regarding masts breaking (due I suppose to compromising with inferior/ species of wood) I am thinking about using stays/shrouds. Not sure if done before or if practical but sure going to explore and get opinions.
Cheers
User avatar
wdscobie
Recognized Old Salt
Posts: 598
Joined: Tue Oct 05, 2010 9:57 pm
Location: Salish Sea
Contact:

Re: SCAMP #457 build at Lake Chapala Mexico

Post by wdscobie »

Stays and shrouds will interfere with balanced lug setup.

If you are worried about building the mast purchase the aluminum mast option.
--
:: Dave Scobie
:: Liveaboard: Baba 30 DEJA VU
:: Owner M6'8" dingy
:: Former SWALLOW - https://sailboatswallow.wordpress.com
:: Former M17 SWEET PEA - https://m17-375.com
:: Former M15 SCRED - https://m15namedscred.wordpress.com/
steve71
Regular Contributor
Posts: 32
Joined: Sun Feb 11, 2018 8:43 pm

Re: SCAMP #457 build at Lake Chapala Mexico

Post by steve71 »

Many thanks for your suggestion.. My mast is just about finished so I will just have to be careful when the time comes to try it out.
Cheers!
steve71
Regular Contributor
Posts: 32
Joined: Sun Feb 11, 2018 8:43 pm

Re: SCAMP #457 build at Lake Chapala Mexico

Post by steve71 »

My hull shape has some flat/straigsections on both port and starboard sides,What is the best solution to build out the flat portions. Should I pile on layers and layers of micro ballooned epoxy or thin laminations of plywood, or some thickening agent
GregWads
Regular Contributor
Posts: 139
Joined: Thu Sep 03, 2015 9:58 am
Location: NWbyW Illinois

Re: SCAMP #457 build at Lake Chapala Mexico

Post by GregWads »

Hi Steve,

Sorry I have not been back to this site for a while. It is probably two late to suggest, but I also had some Flat spots. I used the two part Total boat epoxy filler. I bought the quart size and have still have some left. It sands fairly easily and can be re-applied over itself when you realize you didn't build up as much as you thougt.

I am just getting ready to build the mast. I have waffled back and forth between birdsmouth and solid, until I found the stika spruce I purchased is actually thicher than I thought. After planing the rough sawn boards I belive I will be able to get 22mm thick staves instead of the 18mm staves listed on the plans. I imagine I will need to adjust the width to account for the thicker staves, but hopefully the resultant mast will be a little more stout. I believe there are several birdsmouth mast calculators on the internet to help do the calcualtions.
Post Reply