SmallCraftAdvisor.com

Posted: **Tue Mar 06, 2018 7:21 pm**

Hope to begin transferring dimensions from plans to plywood this week.

Posted: **Wed Mar 07, 2018 8:30 am**

Best of luck with this new adventure Steve

Posted: **Sun Mar 11, 2018 6:38 pm**

Good luck. It is an enjoyable and rewarding process.

Posted: **Sun Mar 11, 2018 7:41 pm**

jhippe wrote:Good luck. It is an enjoyable and rewarding process.

Many thanks!

Posted: **Sat Mar 24, 2018 10:49 am**

I have been laying out the bulkhead #3 and am wondering what dictates the curve at the top. Any ideas?

Posted: **Sat Mar 24, 2018 11:44 am**

Steve
Can you be a little clearer with your question?
The cabin top, the mast box, the ramp ands mast box.

Not sure what your question means.

#3.jpg

#3-2.jpg

steve71 wrote:I have been laying out the bulkhead #3 and am wondering what dictates the curve at the top. Any ideas?

Posted: **Sat Mar 24, 2018 1:50 pm**

Hi and thanks,

I am referring to the actual curve of the cabin top.

Posted: **Sat Mar 24, 2018 1:53 pm**

Hi,
Thanks. I am referring to the curve along the top edge of bulkhead #3.

Posted: **Sun Mar 25, 2018 4:02 am**

The plans delineate the curve of the top of blk 3

steve71 wrote:Hi,
Thanks. I am referring to the curve along the top edge of bulkhead #3.

Posted: **Sun Mar 25, 2018 3:15 pm**

Thanks!

SCAMP #457 build at Lake Chapala Mexico