SCAMP Hardware and Rigging Kits @ Duckworks

The place to discuss SCAMP (Small Craft Advisor Magazine Project), our 11' 11" micro minicruiser.

Moderator: Moderator

Post Reply
User avatar
Editors
Site Admin
Posts: 654
Joined: Wed Sep 22, 2010 2:10 pm
Location: Port Townsend, WA
Contact:

SCAMP Hardware and Rigging Kits @ Duckworks

Post by Editors »

Hi All,

We're working at building some SCAMP rigging and hardware kits for Scamp builders. Obviously there are a variety of ways to rig and outfit a Scamp, but these preliminary packages are based on some of the proven methods we've seen and employed and some we've not yet tested but expect will work well.

These lists will undoubtedly evolve as different or better ideas come along, and neither are these lists complete (fasteners aren't included either). The kits will be posted for sale at the Duckworks Boat Builder's Supply page soon http://www.duckworksbbs.com , but I'm posting it here as general reference. Prices for each "package" are included at the bottom of that grouping.

Thanks for your support and feedback.

—Eds

Scamp Rigging Kits

Boom and Running Rigging

2 10-foot lengths of 4 mm Marlow Excel Pro for 1st Reef
2 20-foot lengths of 4 mm Marlow Excel Pro for 3rd Reef
4 SD043030 3” cleats for reefing lines
1 60-foot length of 4 mm Marlow Excel Pro for Topping / Lazy jack system (cut to suit)
1 SD043065 3” cleats topping lift/ lazy jack line on mast
1 RL313 pad eye for connection point for topping/ lazy jack 2/3rd aft on boom
1 SD2030 clam cleat with fairlead for topping lift adjust on boom
2 SD-143520 stainless fixed eye shackles for topping lift
8 SD-082615 fairleads with stainless liners for tying off or turning reef lines on boom

1 321A block lashed to boom for downhaul
1 RL313 pad eye for locating lashed downhaul block on boom
1 RL 306AB Deck block mounted on pad on cabtintop beside mast
1 RL 262 stainless base cam cleat with eye for downhaul
1 12-foot section of 5 mm Marlow Excel Racing black for downhaul

1 RL304A as ½ of mainsheet traveler becket
1 RL 305A as ½ of mainsheet traveler becket
3 RL321A swivel blocks for mainsheet assembly and boom
3 RL313 pad eyes as locators for lashing boom blocks or for attaching boom blocks
1 55-foot length of 5/16” poly double braid for mainsheet
1 6-foot length 5/16” poly double braid traveler

1 18-inch length of 5/8 sail track
1 SS 5/8” slide
1 SD140151 shackle to attach sail clew and to track slide
1 RL340 cheek block for outhaul.
1 8-foot section 4 mm Marlow Excel Racing line black for outhaul
1 SD2030 clam cleat with fairlead for outhaul

OPTIONAL
#3 Jack Tar Spar Leather kit for protecting boom against mast
2 RF 20151 cheek blocks for reef lines

$313.48

Mast and Yard

1 RL301A block for masthead halyard
1 SD081200 pad eye for “snotter” line to keep boom from going far forward
2 SD043030 3” cleats for lazy jack and halyard line when traveling
1 3-foot length Marlow 4mm Excel Racing black for snotter

1 RL301A block for yard halyard lead
1 RL313 pad eye to attach block on yard or to locate lashing to hang block
1 35-foot length ¼” double braid poly for halyard
1 RL306A Swivel base deck block for halyard
1 SD41605 5” stainless cleat for halyard on cabintop

OPTIONAL
#2 Jack Tar Spar Leather kit for protecting boom against mast

$67.21

Centerboard Uphaul Line System
1 481-S Turning Block designed specifically for Scamp
1 302-A Single Becket Block
1 RL313 pad eye to attach block
1 RL378A Racelite Fiddle Block
1 RL261S Racelite Cam cleat w/flange base and strap
1 13-foot length of ¼” poly double braid

$61.06

Deck Cleats

6 SD41606 6” stainless deck cleats for docklines

OPTIONAL
6 BA675 Cast Bronze Cleats

$82.50

Pintles and Gudgeons
1 set RL490-SCAMP Heavy-duty Scamp-specific pintles and gudgeons

$61.14

Hatches
*There are lots of ways to hatch Scamp—this is just one suggested simple layout.

2 DPF1115 “Standard size” 11 x 15” seat hatches, one for each side.
2 DPF1323 “Standard size” 13 x 23” cabin hatches for bulkhead #3
3 SD337161 Screw-out white with clear deck plate (1 between bulkhead 3 and 4, 1 for ballast tank, 1 between 5 and 6)

OPTIONAL
2 DPF1119 Hatches for WIDER openings in seats.
3 SD337166 Screw-out clear deck plates with BLACK rings
Additional screw-out plates or hatches

$287.47

Ports
2 4-inch bronze port kits designed for Scamp specifically. Bronze rings, tempered ¼” glass, custom marine plywood rings for inside, and bronze screws.

OPTIONAL
2 SD337161 Screw-out white with clear deck plates used as bargain portlights

$184.00

Sail
1 SCAMP class sail made by Neil Pryde. Top quality 5.3 ounce Challenge cloth in cream or tanbark. Sail features finger-style patches, three rows of reef points with reef bands, sail bag and sail ties.

$699.00
The smaller the boat the bigger the adventure.
Post Reply