First Launch of Rowcruiser 'Impatience'

This forum is offered for discussion about the Colin Angus designed RowCruiser.

Moderator: Moderator

Post Reply
LorneK
New Contributor
Posts: 4
Joined: Sat Dec 12, 2020 6:55 pm

First Launch of Rowcruiser 'Impatience'

Post by LorneK »

Whirlwind 18 day build started March 2, finished to a high quality 'belt sander' finish. Paint, trailer, and fittings over the last week or so.

Launched in 15kph winds gusting to 25. I found it difficult to maintain heading until I added 40lbs of rocks in the prow. In that configuration, Impatience tracked very well into the wind, and returned nicely downwind with only about 15lbs moved aft.

Only a few whitecaps, and moderate boat wakes, but I was happy with stability under these conditions. I can stand cautiously and move about the boat.

Hoping to set out on a little adventure next weekend. Will likely post on https://www.instagram.com/lorne_kelly/


1.jpg
2.jpg
3.jpg
You do not have the required permissions to view the files attached to this post.
LorneK
New Contributor
Posts: 4
Joined: Sat Dec 12, 2020 6:55 pm

Re: First Launch of Rowcruiser 'Impatience'

Post by LorneK »

DSC_0431.JPG
DSC_0432.JPG
DSC_0434.JPG
You do not have the required permissions to view the files attached to this post.
LorneK
New Contributor
Posts: 4
Joined: Sat Dec 12, 2020 6:55 pm

Re: First Launch of Rowcruiser 'Impatience'

Post by LorneK »

DSC_0437.JPG
DSC_0482.JPG
DSC_0484.JPG
You do not have the required permissions to view the files attached to this post.
LorneK
New Contributor
Posts: 4
Joined: Sat Dec 12, 2020 6:55 pm

Re: First Launch of Rowcruiser 'Impatience'

Post by LorneK »

DSC_0485.JPG
DSC_0494.JPG
You do not have the required permissions to view the files attached to this post.
Post Reply